Elevator Installation in Islamabad & Rawalpindi
Passenger, home, hospital, cargo, glass and hydraulic lifts, surveyed, engineered, installed, tested and handed over by one team.
- overview
Elevator installation in Islamabad and Rawalpindi follows seven stages: a site survey, engineering and design sign-off, shaft and civil preparation, equipment delivery, installation and wiring, load testing, and handover with documentation. Expert Elevators & Industrial Solutions manages all seven for passenger, home, hospital, cargo, glass and hydraulic lifts.
A lift is a building system you will rely on every day for decades, so the quality of the installation matters as much as the equipment. A poorly set-out shaft, an unprepared pit or untested safety devices lead to breakdowns, higher maintenance bills and safety risk.
We work with developers, building owners, hospitals, institutions and homeowners across Islamabad and Rawalpindi. Every project starts with a free site survey, and you get a written scope, timeline and warranty terms before any work begins.
- Our Process
Installation Process
Step by Step
01
Site Survey & Consultation
A senior engineer visits your site, measures the space, checks the shaft or proposed location, and discusses your requirements. The survey is free.
02
Custom Design & Engineering
Cabin size, finishes, control layout and safety features are specified to your project and confirmed in writing before any equipment is ordered.
03
Civil Work & Shaft Preparation
We coordinate shaft construction, pit preparation and machine room or control-panel space with your contractor, so the site is ready before equipment arrives.
04
Equipment Supply & Delivery
Components are ordered against the approved specification and delivered to site. Major components are identified by make and model in your quotation.
05
Installation & Wiring
Our engineers carry out the mechanical installation, electrical wiring and control system setup.
06
Testing, Safety Checks & Commissioning
Full load testing, speed checks, emergency braking tests and system diagnostics are completed before handover.
07
Handover & Documentation
You receive certificates, warranty papers, manuals and staff training. Your installation warranty starts at handover.
Types of Elevators We Install

Passenger Elevators

Freight / Cargo Elevators

Home / Residential Lifts

Hospital / Stretcher Elevators

Panoramic / Glass Elevators

Hydraulic Elevators
Elevator Installation Pricing in Islamabad & Rawalpindi (2026)
Installation cost in Islamabad and Rawalpindi depends on capacity, floors, drive system, brand and cabin finish. Here is what you can expect. For an exact figure, book a free site survey.
| ELEVATOR TYPE | FLOORS | TYPICAL PRICE RANGE (PKR) |
|---|---|---|
| Home Lift (Hydraulic) | 2 to 3 | 1,500,000 to 2,800,000 |
| Home Lift (Traction) | 3 to 5 | 2,200,000 to 3,800,000 |
| Passenger Elevator (MRL) | 4 to 6 | 2,500,000 to 4,500,000 |
| Passenger Elevator (Traction) | 6 to 10 | 3,800,000 to 6,500,000 |
| Hospital Lift | 4 to 8 | 4,500,000 to 8,000,000 |
| Freight / Cargo Lift | 2 to 4 | 2,800,000 to 6,500,000 |
| Panoramic Glass Elevator | 2 to 6 | 4,500,000 to 9,000,000 |
| Dumbwaiter | 2 to 4 | 600,000 to 2,500,000 |
What Your Building Needs Before a Lift Can Be Installeds
- The clear shaft width and depth set the largest cabin that fits. A standard 4-person residential lift needs roughly 1500 mm x 1500 mm as a starting point, but door type, drive system and cabin design change this.
- The pit below the lowest floor houses the buffers and lower equipment. Faster and heavier lifts need deeper pits.
- The space above the top floor must allow for cabin height and safety clearances.
- Most lifts need a stable, correctly rated electrical supply and proper earthing. We confirm the requirement for your chosen model.
- Lift components are long and heavy, so stairways, gates and site access affect how equipment reaches the shaft.
- Expert Elevators
Project Gallery of Elevator Installation
Frequntly Asked Questions
How long does elevator installation take in Islamabad and Rawalpindi?
A standard residential lift usually takes 4 to 6 weeks from confirmed order to handover, and commercial or industrial projects 8 to 12 weeks. Actual time depends on shaft readiness, building height, equipment lead time and finishes. We give you a written timeline before work begins so you can plan around it.
How much does it cost to install an elevator?
Cost depends on the lift type, capacity, number of stops and travel height, drive system, door type, cabin finish, equipment make, and whether shaft and civil work are included. Two quotations are only comparable if the scope matches. We give a written quotation after the site survey, with scope, equipment and warranty stated.
Do I need a machine room for an elevator?
Not always. Machine-room-less (MRL) traction lifts place the motor and controller in or near the shaft, so no separate machine room is needed. Hydraulic lifts need space for a power unit, though it can sit away from the shaft. We recommend a drive system at the free site survey.
Can you install a lift in an existing building?
Yes. A lift can be added in an existing shaft or in a new shaft built for it, often in structural steel or glass-and-steel. We assess the structure, space and access first, then design the most practical option. Retrofits need more survey detail than new construction, so we survey before quoting.
What shaft size is needed for a 4-person lift?
A shaft of roughly 1500 mm x 1500 mm is a common starting point for a standard 4-person residential lift. Exact clear dimensions depend on cabin size, door type and drive system, so we confirm them at the site survey before any civil work begins.
Do you handle civil work and shaft construction?
We coordinate shaft construction, pit preparation and machine room or panel space readiness, working with your contractor or construction team so the site is prepared before equipment arrives. What is included is written into your quotation so there are no surprises on scope.
What is the difference between a hydraulic and a traction elevator?
Traction lifts use a motor, ropes or belts and a counterweight, and suit most passenger buildings, including taller ones. Hydraulic lifts use a pump and piston, and are usually chosen for low-rise buildings and heavy loads. We recommend one based on height, load, speed, space and budget.
What testing is done before handover?
Before handover we carry out full load testing, speed checks, emergency braking tests and system diagnostics. You then receive certificates, warranty papers, manuals and staff training on handover day. A lift is not handed over until those checks are complete.
What warranty comes with a new installation?
New installations carry a 12-month installation warranty that starts at handover. Exact coverage and exclusions are stated in your written quotation. After the warranty period, the lift can move onto a maintenance contract.
Which areas do you serve?
We install lifts across Islamabad and Rawalpindi, for commercial buildings, plazas, hospitals, institutions and homes, and take on projects elsewhere in Pakistan, as our gallery shows. Call or WhatsApp with your location and we will confirm availability for a site survey.
Get a Free Site Survey and Quotation?
Tell us your building type, number of floors and location in Islamabad or Rawalpindi, and a senior engineer will arrange a site visit.